Ring and Pinion Set GM10-342 41-12 Teeth 3.42 Ratio

$45

Part Number: GM10-342
Part Name: Crown and Pinion Gears / Ring and Pinion Gears Set
Differential Case Design Type:GM 8.5/8.6 in.
Ring and Pinion Ratio: 3.42:1
Cover Bolts:10
Ring Gear Bolts:10
Pinion Spline Count:30
Ring Gear Rotation:Standard
Ring Gear Teeth:41
Pinion Gear Teeth:12
Ring Gear Diameter (in):8.500 in.
Pinion Shaft Diameter (in):1.626 in.
Quantity:Sold as a set.
Notes: Will work with ABS ring. Must use 2.73:1 or numerically higher ratio carrier.

Material, MOQ, Lead Time

Material: 20CrMnTiH3 Chinese standard GB/T3077—1999; 8620H USA ASTM A304; 22CrMnTiH Chinese standard GB/T3077—1999.
Tolerance Control: Outer Diameter: ±0.005 mm. Length Dimension: ±0.05 mm
Production Capacity: Per month 30000 sets Crown Wheel and Pinion
MOQ: 10 Sets for NEW customer.
Lead Time: Depends on order. Usually 20 Days.